If you already have run the FM-150 machine before, follow these steps:

1. Power up FungoMan FM-150 Automated Baseball Practice Machine using (2) the Power Switch located on the electrical enclosure on the back of the machine.
2. Turn on the PDA using (13) Power Switch.

(13) Power Switch

3. Make sure your PDA wireless radio is on. Click Start, then iPAQ Wireless. If the WiFi has a red X, click the WiFi icon.

4. Perform a Soft Reboot.

 

Bottom Image

1. Reset Button
2. Charging/ActiveSync Connector

To perform a soft reboot, use the stylus to press the small hole on the bottom of the PDA. The FungoMan application will load after the hp startup programs have been loaded.

NOTE: Please wait until the login screen is present before attempting to use the machine.

It is recommended that a soft reboot be performed each time the application is used.

Performing a soft reboot on a PDA has the effect of ending all running programs on the PDA and re-starting the PDA.

4. Click on the FungoMan Icon. You should see a blinking Loading FungoMan... message.

6. Click in your numeric access code as supplied by FungoMan, LLC and click enter.

7. If you are intending to control the FungoMan machine, click Connect to FungoMan. After a few seconds, you should see FungoMan perform its homing routine.

8. You should see a message asking "Do you want to connect to FungoMan" Click Yes. You should see FungoMan perform its homing routine.

9. If you are want to work in disconnected mode (i.e. work with routines), click No to connect.